用于LED驅動器及電信電源的48 V、2 A高能效單段隔離功率因數校正電源
This application note describes a relatively novel and simple way to produce an off-line, power factor corrected 15 Vdc and higher output power supply using an isolated, single stage conversion topology. The power topology is essentially a buck-boost derived flyback converter
operating in continuous conduction mode (CCM) and utilizing ON Semiconductor’s NCP1652A controller which was designed specifically for this implementation. The power supply described in this application note is a 48 Vdc, 2 A supply with universal AC input and is intended for
general purpose supplies, telecom distributed power “front-ends” and constant voltage LED drivers such as those used in area lighting and distributed lighting applications such as refrigerator case lighting and cove lighting. Efficiencies approaching 90% were achieved with
a power factor exceeding 0.95 for most typical loads. The supply includes overcurrent protection, overvoltage protection, brownout detection, and an input EMI filter.
采購指南
更多>>特別推薦
- 噪聲中提取真值!瑞盟科技推出MSA2240電流檢測芯片賦能多元高端測量場景
- 10MHz高頻運行!氮矽科技發布集成驅動GaN芯片,助力電源能效再攀新高
- 失真度僅0.002%!力芯微推出超低內阻、超低失真4PST模擬開關
- 一“芯”雙電!圣邦微電子發布雙輸出電源芯片,簡化AFE與音頻設計
- 一機適配萬端:金升陽推出1200W可編程電源,賦能高端裝備制造
技術文章更多>>
- 精準量測,彈性部署:構建下一代 DDR 測試防線
- 新技術重塑生活,新場景驅動未來——CITE2026將于4月盛大啟幕
- 熱成像哪個牌子效果好?“清晰度”背后的三重技術競賽
- SmartDV首次以“全棧IP解決方案提供商”身份亮相Embedded World 2026
- 從工具到平臺:如何化解跨架構時代的工程開發和管理難題
技術白皮書下載更多>>
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall
熱門搜索




